Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working after a few days, it could be due to a dead battery in the coin or water damage the receiver module or a defective electronic chip. Luckily these are all easy to fix and you'll have your vehicle back to normal in no time at all!
Car keys can also become faulty due to the fact that the blade on the key gets worn. It is easy to fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them install a new key blade for you.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not send a clear signal. The key fob could cease to function and stop you from locking or unlocking your doors or starting the engine. You'll need a new battery on your key fob to fix this.
You'll need to purchase batteries for replacement from an auto parts shop or your local hardware store. When you buy the battery, ensure that it's new and hasn't sat on the shelf for too long. A brand new battery has more capacity and can send a stronger signal your vehicle.
After replacing the battery Try locking and unlocking the doors of your Peugeot with the key fob. If the doors aren't unlocking the issue is likely to be in the receiver module of the car that can be reset by your local Peugeot dealer.
The chip inside the key fob can also be damaged. It's possible to harm your key fob if you drop it on the ground, or expose it to moisture. Rubber seals that protect your chip from moisture can be worn out over time. This is especially true if you expose your key fob to water over long periods of time, like submerging it in the ocean or in the ocean. To avoid this occurring, it's crucial to keep your key fob free from moisture and not let it come in contact with water.
Water Damage
Don't lose hope on your key fob when it gets wet, regardless of whether you slipped into the pool or slipped into a Puddle. While the key fob comes with rubber seals to protect it from water, long-term exposure to water may lead to damage to its electronic chip. Water is a great conductor, and any water that gets inside the key fob will trigger an array of short circuits, which will eventually ruin the electronic chip. After removing the battery, scrub the contacts with isopropyl ethanol and dry it completely before putting it back in.
Your Peugeot 308 may not start because of the battery being dead. Jumper cables are a great method of restarting the engine if you have an extra car. If the battery is the issue, it will need to be replaced.

A poor receiver in the car could also block it from receiving the signal from the keyfob. The key fob might be damaged or there may be a problem with the antenna, wiring, or the key fob itself. If G28 using a new key fob it may need to be programmed into the vehicle. If you're unable to solve the issue, contact a professional technician. A technician trained in the field will be able determine the issue quickly and then fix it right away.
Radio Interference
Interference can cause problems such as a key fob that isn't recognized or has a restricted range. It is either radiated or conducted, with the latter resultant from power supply cables or the speaker wiring being too close to electrical components. In general, rerouting cables and moving them away from these components can solve the problem.
It's unlikely that someone is listening in on your key fob's signals to steal your car, but it's possible that your signal has been drowned out by radio frequency interference. This is a simple problem to fix.
If your key fob isn't being recognized by the system, try replacing the battery. Also, make sure that the battery you are using is the right size and type. Batteries that are not the right dimensions can harm your battery.
Some alarm systems that are sold on the market and radar detectors use the same radio frequency as your key fob, and they could cause them to interfere with your key signals. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system that is used in a car has a receiver that receives radio signals from the key fob. If the receiver has developed problems, you won't be in a position to begin your vehicle regardless of whether the key fob works and can be reset. The issue could be caused by a number of causes, including a dead coin battery and water damage. The receiver could also be malfunctioning due an internal or software issue or damage to the key itself.
One of the most common reasons why your Peugeot 308 key fob is not working is that the battery inside has died. It is possible to replace it by a new battery however, it is essential to select the correct battery for your key fob. It is best to use batteries that are the same size in terms of voltage, size, and specifications as the original.
Your Peugeot 308 keyfob may not function if associated with a different vehicle. You may have accidentally given your key fob away to a friend or it was used to unlock other vehicles. This can be resolved by reprogramming the key fob using an OBDII scan. This tool will request information about your car, such as its VIN or engine type. It is important that you enter the correct information.